Since the safe is used to secure essential documents from any criminal activity, it is also essential to ensure safety as well. It is because; sometimes, the criminals take away the safe with them to unlock it at their place. Therefore they can get enough time to damage or to torture the safe to open it.
Try to avoid drilling methods to keep your safe. But sometimes it becomes a bad or useless idea. It is because if you are living in a rented house, then your landlord will not let you drill the floors.
If you have owned your own house, then it is also a bad idea to drill the high-end floors, which is expensive. Now, it becomes difficult to answer how to secure a safe without bolting it to the floor?
The solution is in hand and no problem is there, as there are plenty of ways to secure a safe and avoiding the bolting methods. One does not have to damage their expensive floors for keeping their safe secure. This article belongs to the most effective ways to protect your safe without damaging your floor.
Ready to study an entertaining guide of some brilliant skills to secure your wall safe!
Table of Contents
- 1 A brief about the necessity of securing the safe:
- 2 Easy ways to hide safely without bolting it on the floor:
- 3 Conclusion:
A brief about the necessity of securing the safe:
It is because you must have hidden your precious assets in it. If you didn’t follow the secure methods, then it will become an easy task for the burglars to keep it away with them.
Apart from this, if you left the safe without securing it, then it could also lead to damage or misplace during natural disasters. Hence, try to find the best tricks to defend your safe and eliminate the idea of drilling them. It is because the drilling floors task will leave permanent damage on the expensive floor.
We have discussed below effective and quick ways to secure your safe from thieves.
One can use a massive and more massive steel sheet to keep secure their wall safe. This technique is effortless as anyone can do it. By bolting your safe with a massive sheet of steel, the safe will become heavier. Thus the burglars would have to struggle a lot to carry it with them.
Apart from this, the other way is to bolt the safe with a steel sheet and then fix it with the wall. You do not have to drill your expensive floor, but you can use the walls of your home to fix the safe on it. If you want to fix the safe on the wall, then you have to use a lightweight steel sheet. It is because the heavy steel sheet could find it difficult to withstand walls.
How to fix the safe with a heavy steel slab?
You can follow the below-given process to bold your safe with a steel slab.
Get a thick steel piece:
The steel sheet needs to be thicker to make your safe heavier. One can use a ¼ inches thick steel sheet that is enough to put extra weight on your safe. It is also essential to get a steel sheet that is larger than your door frames, so you can easily hide it from the burglars behind the doors if you want to fix the safe with doors.
After getting the accurately sized steel sheet, now you have to drill holes in the sheet, make sure the holes are parallel to the interior holes of the safe. So, it can be tightened easily. One can borrow a drill machine for this task.
Bolt the safe with steel sheet:
Once you have drilled holes in the steel slab, now the time is to bold the safe with steel safe. Use the accurate size and well-material screw to tighten the safe with the steel sheet. Now you’re safe becomes heavier enough to carry comfortably.
Easy ways to hide safely without bolting it on the floor:
It is also possible to secure it without bolting or drilling inside the floor. Even it requires fewer efforts to do the same. Whether you don’t want to drill your floor, but it still doesn’t mean you cannot use the floor to secure your safe. The best way is to hide the same on the floor.
This technique can be used on wooden floors. Since it is a good idea but it also has some disadvantages. One cannot be able to access their safe easily. Apart from this, if you didn’t use the proper technique, then it could damage a significant area of your floor. Therefore it is good to hire a professional for this purpose. If you do not want to hire experts, then you can follow the below-given instructions.
First of all, you have to prop your floorboard. For this, you have to measure a certain area to keep the safe under it. One can use a grinder and a prying tool to prop the floorboards. After propping it, ensure there are not any plumbing pipes or space is enough to place your safe into it. If the location is right, then step forward to the next step.
Place the safe underfloor:
The next step is to place the safe where you have cut the floorboard. After placing the safe under the floor now, the time is to hide it. At this time, a question will inevitably encounter your mind. That is, if you have sealed the area, then it will be more difficult to access when you need something from the safe.
Therefore, do not seal it, just put the cut piece of floorboard on it and hide the safe. Now the safe becomes invisible for anyone who didn’t know that you have protected your safe here.
Put some heavyweights in it:
The other simple way is to add some heavyweights in the safe to make it heavier. It is one way that requires less money for installation to secure your safe.
For this technique, you will need a component that weighs more than fifty pounds. One can buy something from the hardware stores, or if you have anything in your home which weighs to
Pounds can use it to make the safe heavier.
The first step is to place the safe at the perfect location where it becomes difficult to spot by anyone. After placing the safe on the desired site, now you can add weights. Make sure the component you are using to increase the weight of your safe has been placed at the bottom part of the safe.
Fix it with the floor:
It is one of the effective ways to unharmed your safe without bolting it on the floor. One can glue the safe on the floor for permanent fixing. For this technique, you will need high-strength polymer glues.
These polymer glues are also known as superglue, which is used to fix woods, glasses, ceramics, and heavy metals. One can follow the below given easy process for this technique.
Trace the accurate size:
The first thing that you have to do is locate the safe where you want to fix it. Carry your safe to its ideal location and place it on the floor. After that, one can use dark-colored tape to trace the size of their safe.
After tracing a certain area to fix your safe, now the time is to apply glue on the surface of the floor. The tape that you have used to trace the dimension will help you as a guide for where you have to put the glue. One can apply the polymer glue in dots on the floor and spread it by using a scraper. Avoid putting so much glue; it is because little drops are enough to run for a long time.
Fix the safe:
Now, the time is to place the safe on the surface of the floor where you have applied polymer glue. You can also force the safe from the upper side to fix it quickly on the floor.
Most of the people used the traditional method to keep secure their safe. The conventional way is to bolt the safe on the floor. By using this method, it becomes a difficult task for the burglars to take the safe away with them or to steal anything from inside the safe. It is because if the safe is fixed with the floor, then the criminals would do not waste time unlocking it with various tools or guessing the code.
But when it is possible to secure the safe without damaging the floor, then why need to drill the expensive floor of your home. One can use plenty of ways, as discussed in this article, to secure their safety from burglars. By using these methods, you can become sure that the burglars will spend a hard time stealing the contents that you have hidden in your safe.