Have you forgotten the lock codes combination of your safe or does the lock get dysfunctional? It can happen to everyone. What can a person do in this solution to break the passcode?
Most of the peep [le start thinking that now they have lost their valuables and guns when they forget the combination codes of the gun safe lock.
If this happened to you also and you are finding the best way how to break into a gun safe, then you are in the right place. This article will perform as the best guide to help you out of this situation.
Before discussing the ideas on how to break into a gun safe into a stack one thing that needs to be cleared out that is, the methods of how to break into a gun safe by breaking the lock will damage the lock system, and you have to repair it later.
The lock repairing and replacement will cost very high, but you do not have any other option.
But there are also some ways to open the gun safe without damaging any component. It depends on the model of your safe which idea will work. We are going to discuss plenty of ways; any of these will work.
So, we will not take you so much time anymore. Now moving forward to deliver the best ideas to break into a stack on a gun safe.
Brief information: Break into a stack!
Most gun safe uses combination locks to keep secure your valuables and guns from unauthorized people. The gun safes are used in homes and offices that provide a comfortable feel and security of your precious’s and guns from burglars.
But sometimes the owner finds difficulty opening the lock of the safe, in the case or forgetting the lock combination or problem in the lock system.
Therefore, it needs to check the lock warranty before buying a gun safe. If there is no warranty on your gun safe, then it is good to try to unlock it before going to the manufacturer. One should try the following for this tough task.
Call a locksmith:
- If you have tried a lot of combinations and are still unable to access your gun safe, then there is hope to unlock it without damaging the lock mechanism. You can take help from a locksmith. One does not have to hit the gun safe with various tools. It is good to try a professional first. The locksmiths have different borescopes to trace the locking mechanism.
- Therefore, you can save your gun safe from any damages, and also you will get the weak points of your gun safe.
Prying technique:
- All the models of gun safes are not air-tightened, as there must be a hole in your gun safe as a hollow space. Therefore, one has to check for any prying space to insert the rod in the safe. It will help to break the lock. This method will damage the locking mechanism as it could not be used later once it is broken.
- One has to push a strong rod into that prying hole and press the rod upward to the outside. While using this method, one has to be extra careful; it is because when you pushed a rod into the gun safe from the prying hole, there are a lot of chances to be attacked with spring power that appears in the lock mechanism.
- After using this technique several times, we assure you that you can reach your goal and will be able to access your gun safe.
Manipulation:
- Manipulation is a method that is generally used by locksmiths. In this method, one has to use bore-scopes to release the spring power of the lock mechanism, and then it becomes easy to unlock the safe. This method will also lead to damage to the locking system.
- One can use the hammering method, as when the lock safe gets hammered again, and again, then the lock mechanism will leave the anchor which holds the locking bar of the gun safe. This method will work after several tries and will make you able to pull out your gun and gun documents from the safe. But you will have to send your gun safe to the repair center to replace the locking mechanism for further use.
Drill the lock system:
- Drilling the gun safe lock system is one of the complicated and laborious ways. This method will not damage the entire locking mechanism of your gun safe. Drilling is also a kind of manipulation, but in this method, you have to attack only the screws of the lock system.
- One will need a drill machine to come in smooth contact with the lock mechanism. You have to drill the palate of the lock system to unscrew it. When the lock system loses all the screws by the pressure of the drilling machine, it will leave the door of your gun safe.
- Thus, you will be able to open it by just opening the door. After unlocking the safe, you will have to buy new screws to re-install the locking mechanism in your gun safe.
Scoop the lock mechanism:
- This method is one of the cost-efficient ways as it doesn’t leave any significant damage to the locking mechanism. It is a kind of manipulation method and follows the drilling technique. Most of the locksmith uses this method to unlock the gun safe.
- For this technique, you have to enter a bore-scope in the lock body around the combination keys and put the bore-scope inactive the combination.
- Thus one can use this method before trying the other high costing techniques. The scooping method depends on the model of your gun safe, as it needs to appear a hole to enter a long steel rod into the lock body. If your gun safe does not have this type of hole, then this method didn’t work with it.
Magnet:
- Yes, it is possible to unlock a gun safe in the forgetting combination keys situation. One will need an earth magnet that is made of neodymium. This type of magnet is readily available on the DIY stores and e-stores like Amazon, Flip kart, etc. the neodymium magnets are generally used to unlock any safe without the key combination.
- To open a gun safe, you will need a larger magnet. One has to keep a soft fabric to hole the magnet while unlocking. It becomes easy to unlock in this way.
- Now you have to move the magnet around to the locking area to locate the solenoid. It is tough to locate the solenoid, so you have to keep patience. Once you get it, then you can easily approach the locking mechanism.
- By using a powerful magnet, one can effectively reset the locks without damaging any component of the locking mechanism. After accessing your gun safe, it is essential to store the eart magnet in the right place.
- It is because an earth magnet can be dangerous enough. It can damage the electronic appliances of your house, like TV, mobile, etc., therefore, do not store it near any electronic device.
Wire and paper clip:
- This method everyone saw in the movies. But in real life, it also works. There are small objects like a thin wire, paper clip or a plastic straw that could help to open a gun safe.
- This most natural way and never leave any damage. But this method depends on the model of your gun safe as it will not work on the latest digital gun safes.
- You have to locate the right hole where you can enter the thin wire and move it around the lock body. Keep your ear close to the lock system and notice the noise. If you heard any encouraging noise then focus on that area to find the key combination.
- This method is as simple as knocking the lock with some simple tools. This technique can save you by spending a lot of money to call a locksmith for this task.
Conclusion:
Hence, one has to make sure that while unlocking the Gun safe, it should not get damaged. You will not be able to use it again if you are trying to break the lock.
We have seen people trying quick methods and then regretting it. There are many methods to unlock it that how to break into a gun safe we have mentioned in the article.
Researching becomes quite interesting if you have an interest in the topic. Similarly, I love to explore new things to deliver effective ways to our users.
Try to recognize the method with simple steps. And, for safety purposes, never share the combination or authentication to any friend or family member.
There are essential documents in the safe that has to be protected. So, unlock your safe only when you are alone at your place.
Related
